卷簾門使用時間久一點就會遇見生銹或腐蝕的，很多時候是由于使用者沒有及時清潔保養，任由風吹雨淋。那么怎么樣做好卷簾門的防銹蝕和浸蝕？下面濟南卷簾門廠家為您解答。

The rolling shutter door will be rusted or corroded if it is used for a long time. Most of the time, it is because the user has not cleaned and maintained it in time, leaving it exposed to the wind and rain. How to prevent rust and corrosion of rolling shutter door? Now the manufacturer of Jinan roller shutter door will answer for you.

1、當卷簾門拉下知道極限長度的時分跟地上距離不應該大于50mm。

1. When the roller shutter door is pulled down and the limit length is known, the distance to the ground shall not be greater than 50mm.

2、卷簾門金屬部位要留心保護和維護，防止有生銹或許腐蝕現象呈現。

2. The metal parts of the roller shutter shall be carefully protected and maintained to prevent rust or corrosion.

3、卷簾門設備方位上方有必要具有防火設備，下端安排包箱或許吊頂時有必要設置活動拆式活動蓋板，下端有必要預留500mm邊長的可拆卸修孔，便于修補維護。

3. It is necessary to have fire protection equipment above the roller shutter equipment. It is necessary to set removable movable cover plate when arranging bags or ceiling at the lower end. It is necessary to reserve a removable repair hole with a side length of 500mm at the lower end to facilitate repair and maintenance.

4、卷簾門底梁座上限方位有必要跟軸承較少200mm距離，制動中止時不發生沖頂?shù)默F(xiàn)象。

4. It is necessary to keep a distance of 200mm from the bearing at the upper limit of the roller shutter sill seat, and there will be no jacking when the braking stops.

5、在卷簾門運用前先檢查理解其工作方向，長度極限以及門洞高度的方位，也不要輕易損壞限位器，防止構成反卷沖頂?shù)葋G掉。

5. Before using the roller shutter, check and understand its working direction, length limit and door opening height, and do not damage the limiter easily to prevent it from being thrown away, such as forming a reverse roll.

6、卷簾門工作時如果呈現較大顫抖或許是反常動靜時建議當即停機檢查，并且檢查是不是有阻撓工作的雜物。

6. It is recommended to stop the machine for inspection immediately if the rolling shutter door appears large shaking or abnormal movement during operation, and check whether there are sundries blocking the operation.

7、建議每年對卷門機進行3次檢查，及時上油工作質量。

7. It is recommended to inspect the door winder three times a year to ensure timely oiling quality.

8、卷簾門操作的時分，操作者有必要站在卷門工作情況方位進行操作，防止發生意外損害。

8. When the roller shutter is operated, it is necessary for the operator to stand at the working position of the roller shutter to prevent accidental damage.

所以在實踐的操作中，仍是要注意些卷簾門的運用與保護事項。更多相關事項就來我們網站http://amazingazon.com看看吧！

Therefore, in the practical operation, it is still necessary to pay attention to the application and protection of rolling shutter doors. Come to our website for more information http://amazingazon.com Look!