電動卷簾門在生活中越來越普及，因?yàn)樗褂闷饋?lái)會更加方便。那么，電動卷簾門調限位教程是什么呢？濟南卷簾門廠家為你解說。

Electric roller shutter doors are more and more popular in life, because it will be more convenient to use. Then, what is the electric roller shutter door adjustment limit tutorial? Jinan roller shutter door manufacturer will explain for you.

電動卷簾門調限位教程是什么

What is the electric roller shutter door adjustment limit tutorial

1、先用工具將它限位器上的螺絲擰開，接著用手拉住它的環形鏈條進行調試，在拉扯時要注意與門保持在一定的距離，而地面則需保持在一米左右的高度。

1. First unscrew the screw on its stopper with a tool, and then pull the circular chain by hand for debugging. When pulling, pay attention to keeping a certain distance from the door, and the ground should be kept at a height of about one meter.

2、調試好了之后，將遙控器拿出來試用一下，看看上、下、停這個三個功能是否能正常使用，還有卷簾門在運行過程中是否正常，有沒有存在卡頓現象。

2. After debugging, take out the remote controller and try it to see whether the three functions of up, down and stop can be used normally, and whether the roller shutter door is normal in the process of operation and whether there is jamming.

3、確定功能都正常之后，再將門簾的高度設置在一個具體位置上，然后開始旋轉限位螺套，當聽到滴答一聲的時候，就可以停止旋轉動作，后將螺絲擰上去就可以了。

3. After confirming that the functions are normal, set the height of the door curtain at a specific position, and then start to rotate the limit screw sleeve. When you hear a tick, you can stop the rotation, and then screw the screw on.

電動卷簾門使用注意事項

Precautions for use of electric roller shutter door

1、在使用電動卷簾門的時候，無論是關閉還是開啟時，現場一定要有人照看，防止行人進出與奔跑，避免造成隱患。而在開啟或是關閉的過程中，如果有出現傾斜或是軌道卡位等現象，那么須立即停止開閉，以免損壞到它的電機。

1. When the electric roller shutter door is used, whether it is closed or opened, it must be looked after by someone on the site to prevent pedestrians from entering and leaving and running and avoid potential safety hazards. In the process of opening or closing, if there is inclination or rail clamping, the opening and closing must be stopped immediately to avoid damage to its motor.

2、電動卷簾門在使用過程中，好不要一次性將其升到高的位置上，其高度以通過車輛高度為準。對于高于卷簾門限制高度的車輛則不能通過的，防止將門給撞壞，影響道它正常使用。另外，需定期檢查門的開關靈活度，并給與加油保養，而在使用完畢之后需及時將它給關閉。

2. During the use of the electric roller shutter door, it is not necessary to lift it to a high position at one time, and its height is subject to the height of the vehicle. Vehicles higher than the limit height of the roller shutter door cannot pass through, so as to prevent the door from being damaged and affect its normal use. In addition, it is necessary to regularly check the opening and closing flexibility of the door, and to add oil and maintain it. After use, it is necessary to close it in time.

以上就是關于電動卷簾門調限位教程是什么以及電動卷簾門使用需要注意什么的全部?jī)?nèi)容，希望對大家有所幫助。想了解更多相關內容，請繼續關注我們網站http://amazingazon.com吧！

The above is all about what the electric roller shutter door adjustment limit tutorial is and what should be paid attention to when using the electric roller shutter door. I hope it will be helpful to you. If you want to learn more, please continue to follow our website http://amazingazon.com Come on!