新聞資訊
聯系我們
濟南富強門業有限公司
聯系人:林經理
電話:151 6888 2846
郵箱:527800164@qq.com
地址:濟南市歷下區化纖廠路8號3號樓101號
濟南卷簾門廠家為大家介紹產品控制要求與方法
來源:http://amazingazon.com 日期:2020-09-07 發布人:
卷簾門能夠滿足防火要求,在一定時間內,可以起到阻止火勢蔓延的作用。用于防火分隔,在各大建筑中使用的非常普遍,它主要由簾板、卷軸、電動機、導軌、支架等組成。為了能讓產品發揮更好的使用效果,濟南卷簾門廠家為大家介紹產品控制要求與方法。
The rolling shutter door can meet the requirements of fire prevention and prevent the spread of fire in a certain period of time. It is mainly composed of curtain board, reel, motor, guide rail, bracket, etc. In order to make the product play a better use effect, Jinan roller shutter door manufacturer introduces the product control requirements and methods.
防火卷簾門廠家產品控制要求:
Product control requirements of fireproof rolling shutter door manufacturer:
相關規范要求防火卷簾門控制滿足三種控制方式:
According to the relevant specifications, the fire shutter door control should meet three control modes:
現場電動控制:門兩側的控制按鈕。
Field electric control: control buttons on both sides of the door.
火災報警聯動控制:控制回路預留的遠程控制開關量觸點。
Fire alarm linkage control: remote control switch value contact reserved in control circuit.
手動控制方式:又稱機械控制的功能,疏散通道上的防火卷簾門兩側設置的啟閉裝置。
Manual control mode: also known as mechanical control function, the opening and closing devices on both sides of the fire shutter door on the evacuation channel.
除上述三種控制方式外,防火卷簾門還加設了溫度熔斷控制裝置。因為,雖然卷簾門采用了雙電源及多種控制方式,如果發生火災時電源斷電就無法動作,雖然設有手動控制裝置,人員無法在火災現場停留,也就很難手動操縱卷簾下降。下面,濟南卷簾門廠家為大家介紹產品的控制方法是如何在應用中體現的。
In addition to the above three control modes, the fire shutter door is also equipped with a temperature fuse control device. Because, although the rolling shutter door adopts dual power supply and multiple control modes, if the power supply is cut off in case of fire, it can not act. Although there is a manual control device, personnel can not stay at the fire site, so it is difficult to manually control the rolling shutter to descend. Next, Jinan roller shutter door manufacturers to introduce the product control method is how to reflect in the application.
濟南卷簾門
Jinan roller shutter door
防火卷簾門應用控制方法:
Application control method of fire shutter door:
用于疏散通道的卷簾門控制器應具有兩步關閉的功能,并應向消防聯動控制器發出反饋信號。防火卷簾門控制器接收到火災報警信號后,應能控制自動關閉到中位處停止;接收到二次報警信號后,應能控制防火卷簾門繼續關閉全閉狀態。
The shutter door controller used for evacuation passageway shall have the function of two-step closing, and shall send feedback signal to the fire linkage controller. After receiving the fire alarm signal, the fire shutter door controller should be able to control the automatic closing to the middle position; after receiving the secondary alarm signal, it should be able to control the fire shutter door to continue to close to the fully closed state.
用于分隔防火分區的防火卷簾門控制器在接收到防火分區內任一火災報警信號后,應能控制到全關閉狀態,并應向消防聯動控制器發出反饋信號。
After receiving any fire alarm signal in the fire compartment, the fire shutter door controller used to separate the fire compartment shall be able to control to the fully closed state, and shall send feedback signals to the fire linkage controller.
聯動控制方式:防火分區內任兩只獨立的感煙火災探測器或任一只專門用于聯動防火卷簾門的感煙火災探測器的報警信號應聯動控制卷簾門下降距樓板面 1.8m 處;任一只專門用于聯動感溫火災探測器的報警信號應聯動控制防火卷簾門下降到樓板面。
Linkage control mode: the alarm signal of any two independent smoke fire detectors or any smoke fire detector specially used for linkage fire shutter door in the fire compartment shall linkage control the rolling shutter door to drop to 1.8m away from the floor; the alarm signal of any one specially used for linkage temperature fire detector shall linkage control the fire shutter door to descend to the floor.
手動控制方式:應由防火卷簾門兩側設置的手動控制按鈕控制升降。
Manual control mode: the lifting shall be controlled by the manual control buttons set on both sides of the fire shutter door.
防火卷簾門是重要的消防設施,在各個建筑以及公共區域中使用,可以在遇到火災時起到對人們保護的作用,為救援爭取時間。以上是防火卷簾門廠家為大家介紹的關于產品控制要求與方法的詳細內容,如果您需要這種產品,可以來電咨詢。
Fire shutter door is an important fire-fighting facilities, used in various buildings and public areas, it can play a role in protecting people in case of fire and fighting for time for rescue. The above is the detailed content about the product control requirements and methods introduced by the manufacturer of fireproof rolling shutter door. If you need this product, you can call for advice.
閱讀/ Recommended reading
- 濟南卷簾門10 2024-12-03
- 車庫卷簾門故障及維修方法 2024-12-14
- 車庫卷簾門的維修和保養方法有哪些 2024-12-07
- 濟南卷簾門:門鎖上了該怎么解鎖? 2024-11-23
- 濟南卷簾門:斷掉一片后的處理方法,你學會了嗎? 2024-11-19
- 如何延長卷閘門的壽命 2024-11-06
- 重視卷簾門門口堆物問題 2024-11-06
- 快速卷簾門介紹與快速卷簾門材料說明 2024-10-26
濟南卷簾門的工作原理及安裝維修
2024-12-18
濟南卷簾門在家庭、商業和工業建筑中得到了廣泛應用,其功能齊全、可靠、美觀實用的特點使其成為門窗裝飾的材料。濟南卷簾門采用高強度鋁合金材料,具備抗風、抗撞擊和防盜特性,并配備...